Mac Os X Users - Edirol UA-1EX Owner's Manual

Mac OS X users

* If the "Authenticate" dialog box appears during the installation, input the password and click "OK."
* What you actually see on your computer screen may be different, depending on your computing
environment and the operating system you're using.
1. With the UA-1EX disconnected, start up the Macintosh.
* Disconnect all USB cables except for a USB keyboard and USB mouse (if used).
2. Exit all currently running software (applications).
If you are using virus checking or similar software, be sure to exit it as well.
3. Place the UA-1EX's ADVANCED (mode select) switch in the OFF position.
4. Connect the UA-1EX to your Macintosh.
5. Open the System Preference dialog box and click Sound.
6. In the Sound Effects tab, click Play alerts and sound effects through and choose UA-1EX as the
playback device for sound effects.
* If you don't want the Macintosh's audio alerts to be heard via the UA-1EX, choose "Built-in audio
controller" or a similar setting so that the internal speakers will be used.
7. Click the Output tab, and choose UA-1EX as the device that will output sound.
* If you want sound to be output from the speakers of your Macintosh, disconnect the UA-1EX from your
Macintosh.
8. If the Input tab is displayed, choose UA-1EX as the device for inputting sounds.
* The output volume of the UA-1EX cannot be adjusted with the Mac OS sound dialog box. Make volume
adjustments through other means, such as on the speaker system you are using.
Please check the following before you use your sequencer software.
• If your sequencer software allows you to make audio input/output settings, choose UA-1EX. For
details, refer to the owner's manual of the sequencer software you are using.
• Connect the UA-1EX to your computer before you start up your sequencer software.
• Do not disconnect the UA-1EX while your sequencer software is running.
Exit your sequencer software before you disconnect the UA-1EX.
• The UA-1EX will not operate in the Mac OS X Classic environment. You can not use it if the
Classic environment is running.
Proceed to "Checking that you hear sound" (p. 32).
53