Edirol UA-1EX Owner's Manual page 48

8. Click [Next].
Depending on your system, the Driver location may differ from
the illustration, but this is not a problem.
9. File (driver) copying will begin.
If the Windows CD-ROM is not inserted in the CD-ROM drive, a "Insert Disk" dialog box may
appear. In this case, insert the Windows CD-ROM into the CD-ROM drive and click [OK].
10. When installation of the USB Composite Device driver is
completed, a dialog box like the one shown here will appear.
Click [Finish].
11. Next, the USB audio device will be detected automatically, and the "Add New Hardware
Wizard" dialog box will appear.
Click [Next], and proceed with the installation in the same way as in steps 6–9.
12. When installation of the USB audio device driver is complete, a
dialog box like the one shown here will appear.
Click [Finish].
Installation of the USB composite device driver and USB audio
device driver has been completed.
Restart Windows.
Next, you will need to make audio input/output device settings.
(➝Input/output device setting (p. 49))
48