Recording Sound From Your Computer Onto Md Or Dat - Edirol UA-1EX Owner's Manual

Recording Sound from Your Computer onto MD or DAT

Here's how you can record audio data from your computer onto a digital device such as MD or
DAT.
fig.digital
Computer
Sampling frequency select switch
Set this to match the sampling frequency of your digital recording device and the sampling
frequency of your sequencer software or the audio data you are playing back.
* After you change the position of the sampling frequency select switch, you will need to disconnect and
reconnect the UA-1EX.
Other notes
• Do not connect anything to input jacks you are not using.
• The UA-1EX does not support professional digital audio device formats.
• The UA-1EX cannot mix the input signals from the various input jacks with the input signal from
the digital input connector and output them from the digital output connector.
Signal flow
Select a sample rate that your recording
device (e.g., MD player) is able to record.
Choose the same sample rate as your
sequencer software or the audio data you
are playing back. ( p.13)
Optical digital cable
DIGITAL INPUT
MD/DAT
37