Redial; Making A Page Call; Leaving A Message - Avaya 4400 User Manual

Redial

The phone stores a record of the numbers that you have dialed. You can display and select a number
from that record.
4406D+ and TransTalk MDW 9040 sets can use redial. When the button is pressed, the last number that
was dialed is re-dialed.
To redial a number dialed:
1. Press Redial. Numbers that you have recently dialed are displayed.
2. To move through the stored numbers, press and Next/Prev.
3. Press the key below a number to redial it or press
call.

Making a Page Call

You can make page calls to any extension or group of extensions that have suitable speakerphones.
You call is only heard by those extension that are free.
4406D+ users can make a page call via the short codes. Contact your system administrator for the
appropriate code.
TransTalk MDW 9040 users can make Page Calls, but cannot receive them.
To make a page call:
1. Press Menu twice.
2. Press Call. Enter the extension or group number (use the top-left display key to backspace).
3. Press Page.

Leaving a Message

When you call another extension that does not answer, you can leave message indication. If their phone
has a message indicator lamp, it will light. If their phone has a display, it may also display your name and
number for a return call.
The lamp on your phone lights when you have messages, see Answering a Message Indicator.
To send a message indication:
1. Press Menu twice.
2. Press Call and enter the extension number (use the top-left display key to backspace).
3. Press Messa.
4. Press Exit .
4400 and 6400 Series User Guide
IP Office 3.2
Exit to leave the display without making a
15-601074 Issue 11a (30th June 2006)
Making Calls
Page 7