Eaton Powerware BladeUPS User Manual page 11

The BladeUPS Bar for parallel systems, mounted in the rear of a
Powerware rack, provides the required input and output connections for
the paralleled UPSs and has a single system-rated input connection.
Figure 2 shows an example of a BladeUPS parallel system.
The BladeUPS system can be installed with Powerware remote power
panels and rack-mounted power distribution systems.
BladeUPS Bar
Bottom
Entry
Wireway
EATON Powerware
® BladeUPS ® (12 kVA) User's Guide
Figure 2. Example of a BladeUPS Parallel System
S
164201649 Rev 3 www.powerware.com
INTRODUCTION
BladeUPS
BladeUPS
BladeUPS
3