V.34 Off; Check Dest. & Send; Select Line; Communication Settings - E-Mail Settings - Oce cm3522 User Manual

Use Document

V.34 OFF

V.34 is a communication mode used for Fax communication of super G3. There are cases when the
communication is not possible in super G3 mode depending on the telephone line conditions when the
recipient's machine or this machine is connected to the line via a private branch exchange.
It is recommended that you set V.34 to off before sending a Fax. This machine automatically returns to V.34
mode when it completes transmission.
!
Detail
This is not used with the following functions.
Polling RX
Polling TX
Bulletin Board Registration
Bulletin Board Polling RX
Check Dest. & Send
A Fax is sent only after a comparison of the specified Fax number with the Fax number information (CSI) for
the recipient's machine indicates a match. This prevents misdirected transmissions since a transmission
error occurs if the numbers do not match.
!
Detail
[Check Dest. & Send] requires that the destination has its fax number registered.

Select Line

Select "Line 1" or "Line 2" to send a fax if a fax multi line is installed. Specify a line for transmission.
!
Detail
You cannot specify a line when "Line 2 Setting" of "Multi Line Setting" is set to "RX Only".
6.5.19

Communication Settings - E-Mail Settings

About E-Mail Settings

Specifies the document name, subject, From address and message body for sending E-Mails.

Document Name

Displays the name of the file to be saved. The document name specified later appears as the document
name, even if the document name was specified in the File Document screen. You can enter up to 30
characters.
Océ cm3522/cm2522
6
6-46