Download  Print this page

Checking Drive Chain Tension - Ducati Diavel Owner's Manual

Hide thumbs


Checking drive chain tension

Have chain tension adjusted by a Ducati Dealer or
authorised Service Centre.
Make the rear wheel turn until you find the position where
chain is tightest.
Set the vehicle on the side stand. Push down the chain at the
point of measurement and release.
Measure the distance between the "aperture" upper profile
and pin centre.
The read distance must be: 9 ÷ 11 mm.
If the drive chain is too tight or too slack, adjust it so
that tension reading will fall within specified range.
(fig. 152)
9 ÷ 11 mm
fig. 152


Table of Contents

This manual is also suitable for:

Diavel carbon absDiavel abs

Comments to this Manuals

Symbols: 0
Latest comments:
  • carlos Jun 12, 2015 12:16:
    need to know symbol of key in display