Download  Print this page

Advertisement

"SPEED" setting
This function allows to change the units of measurement of
speed (and hence even the ones of distance travelled).
Currently set unit of measurement is highlighted in green on
the display; use button (1, fig. 14) "▲" or (2, fig. 14) "▼" to
shift the arrow on the left onto the new setting and confirm
by pressing the reset button (12, fig. 12).
Save the setting and, when coming back to main screen, any
new unit of measurement set will be present.
1) Km/h: by setting this condition the following values will
have the same units of measurement:
- TOT, TRIP1, TRIP2, TRIP FUEL: Km
- Vehicle speed and AVERAGE speed (SPEED AVG): Km/h
2) mph: by setting this condition the following values will
have the same units of measurement:
- TOT, TRIP1, TRIP2, TRIP FUEL: miles
- Vehicle speed and AVERAGE speed (SPEED AVG): mph.
To exit the setting function, press the reset button (12, fig.
12) where "EXIT" is highlighted.
"TEMPERATURE" setting
This function allows you to change the units of measurement
of the temperature.
Currently set unit of measurement is highlighted in green on
the display; use button (1, fig. 14) "▲" or (2, fig. 14) "▼" to
shift the arrow on the left onto the new setting and confirm
by pressing the reset button (12, fig. 12).
Save the setting and, when coming back to main screen, any
new unit of measurement set will be present.
3) °C: by setting this condition the following values will
have the same units of measurement:
- Engine coolant temperature and T_AIR: °C
4) °F: by setting this condition the following values will
have the same units of measurement:
- Engine coolant temperature and T_AIR: °F
To exit the setting function, press the reset button (12, fig.
12) where "EXIT" is highlighted.
E
81

Advertisement

Table of Contents

This manual is also suitable for:

Diavel carbon absDiavel abs

Comments to this Manuals

Symbols: 0
Latest comments:
  • carlos Jun 12, 2015 12:16:
    need to know symbol of key in display