Replacing the high and low beam bulbs
Before replacing a burnt-out bulb, make sure that the new
bulb complies with the voltage and wattage specified in the
"Wiring diagram", page 182. Always test the new bulb
before refitting any parts you have removed.
fig. 154 shows the locations of the low beam bulbs (LO), high
beam bulbs (HI) and the parking light bulb (1).
Have the high and low beam bulbs replaced by a Ducati
Dealer or an authorised Service Centre.
The headlight might fog up if the vehicle is used under
the rain or after washing.
Switch headlight on for a short time to dry up any