Download  Print this page

Stored Lap Display Function - Ducati Diavel Owner's Manual

Abs.
Hide thumbs

Advertisement

Stored LAP display function

E
This function displays the stored LAPs.
To access the function it is necessary to view the "setting"
menu page 48, using button (1, fig. 14) "▲" or (2, fig. 14)
"▼" select the "LAP" function and press the reset button
(12, fig. 12) to go to next page.
Use button (1, fig. 14) "▲" or (2, fig. 14) "▼" to select "LAP
DATA" indication and press the reset button again (12, fig.
12) to enter the page showing the previously recorded lap
times.
The dashboard displays the information as follows:
- at top left, the number of the displayed lap (ex.: LAP
N.01);
- at bottom left, a rectangle inside which is the lap time
(TIME), top speed in that lap (SPEED MAX) and top rpm
in the same lap (RPM MAX);
- on the right, use button (1, fig. 14) "▲" or (2, fig. 14) "▼"
to select "NEXT" (so that every time the reset button is
pressed (12, fig. 12) the next lap is displayed) or "PREV"
(so that every time the reset button is pressed (12, fig.
12) the previous lap is displayed);
To exit, select "EXIT" and press the reset button (12, fig. 12).
Note
The MAX stored speed is indicated on the display
(increased by 5%).
72
If no lap times are saved in memory, "NO LAP" indication is
displayed and lap timer will indicate "-.- -.- -", MAX rpm will
be = - - - - - - and MAX speed = - - - - -.
Note
If the stored times are deleted while the LAP function
is active, it will be automatically deactivated.

Advertisement

Table of Contents

This manual is also suitable for:

Diavel carbon absDiavel abs

Comments to this Manuals

Symbols: 0
Latest comments:
  • carlos Jun 12, 2015 12:16:
    need to know symbol of key in display