"Trip 2" meter
This function shows the distance travelled since the Trip
meter was last reset (in Km or miles depending on the
Holding the button (1, fig. 14) "▲" pressed for 3 seconds
when this function is displayed resets the trip meter.
When the reading exceeds 9999.9, distance travelled is reset
and the meter automatically starts counting from 0 again.
If the system measurement units are changed at any
moment through the "SET UNITS" function of the Setting
menu, or if there is an interruption in the power supply
(Battery Off), the distance travelled is reset and the count
starts from zero (considering the newly set unit of
Distance travelled on fuel reserve: "TRIP
This function shows the distance travelled on fuel reserve (in
Km or miles depending on the specific application).
When the fuel light comes on, the display automatically
switches to the "TRIP FUEL" indicator.
Trip fuel reading remains stored even after Key-Off until the
vehicle is refuelled.
Count is interrupted automatically as soon as fuel is topped
up to above minimum level.
When the reading exceeds 9999.9, it is reset and the count