Indicator "SPEED AVG" - Average speed
This function shows the average speed of the motorcycle.
The calculation is made considering the distance and time
travelled since the last Trip 1 reset. When Trip 1 is reset, the
value is set to zero and the first available value is shown on
the display 10 seconds after the reset. Dashes "- -.-" are
shown on the display during the first 10 seconds when the
value is not yet available.
The active calculation phase occurs when the engine is
running and the vehicle is stopped (moments when the
vehicle is not moving and the engine is off are not
The calculated value is displayed increased by 5% to align it
with the vehicle indicated speed.
It is possible to change the units of measurement of "speed"
(and "distance travelled") from Km/h (and Km) to mph (and
miles) through the "SET UNITS" function of the Setting menu.
Indicator "TRIP TIME" - Trip time
This function shows the vehicle trip time.
The calculation is made considering the time travelled since
the last Trip 1 reset. When Trip 1 is reset, the value is set to
The active phase calculation occurs when the engine is
running and the vehicle is stopped (when the vehicle is not
moving and the engine is off the time is automatically
stopped and restarts when the counting active phase starts
When the reading exceeds 511:00 (511 hours and 00
minutes), the meter is reset and automatically starts
counting from 0 again.