Download  Print this page

Advertisement

"CONSUMPTION" setting
E
This function allows to change the units of measurement of
the Average and Instantaneous fuel consumption.
Currently set unit of measurement is highlighted in green on
the display; use button (1, fig. 14) "▲" or (2, fig. 14) "▼" to
shift the arrow on the left onto the new setting and confirm
by pressing the reset button (12, fig. 12).
Save the setting and, when coming back to main screen, any
new unit of measurement set will be present.
5) Km/l: by setting this condition the following values will
have the same units of measurement:
- CONS. and CONS. AVG. : Km/l
6) l/100: by setting this condition the following values will
have the same units of measurement:
- CONS. and CONS. AVG: l/100
7) UK mpg: by setting this condition the following values
will have the same units of measurement:
- CONS. and CONS. AVG: UK mpg
8) USA mpg: by setting this condition the following values
will have the same units of measurement:
- CONS. and CONS. AVG: USA mpg
To exit the setting function, press the reset button (12, fig.
12) where "EXIT" is highlighted.
82

Advertisement

Table of Contents

This manual is also suitable for:

Diavel carbon absDiavel abs

Comments to this Manuals

Symbols: 0
Latest comments:
  • carlos Jun 12, 2015 12:16:
    need to know symbol of key in display