Adjusting For The Paper Type; Adjusting The Transfer Belt Unit - Xerox WorkCentre 6605 User Manual

Maintenance

Adjusting for the Paper Type

Use Adjust Paper Type to compensate for paper thickness within a paper type. If the printed image is
too light, use a heavier setting for the paper you are using. If the printed image is mottled or
blotchy-looking, decrease the setting for the paper you are using.
To adjust the paper type:
At the printer control panel, press the Machine Status button.
1.
2. Touch Tools>Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Service Tools.
Touch Paper Type.
5.
To select the paper type, touch Plain or Labels.
6.
7. To select the weight range of the paper, touch Lightweight or Heavyweight.
Touch OK.
8.
9. To return to the Service Tools menu, press the Back arrow. To return to the Services Home menu,
press the Services Home button.

Adjusting the Transfer Belt Unit

Adjust Transfer Belt Unit allows you to improve print quality for selected paper types. If the printed
image is too light, increase the offset for the paper you are using. If the printed image is mottled or
blotchy-looking, decrease the offset for the paper you are using.
To adjust the transfer belt unit:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools>Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Service Tools.
Touch Adjust Transfer Belt Unit.
5.
6. To adjust the black level, touch K Offset.
7. To increase or decrease the amount of offset, press the arrow buttons, then press OK.
To adjust the color level, touch YMC Offset.
8.
9. To increase or decrease the amount of offset, press the arrow buttons, then press OK.
10. To return to the Service Tools menu, press the Back arrow. To return to the Services Home menu,
press the Services Home button.
®
222 Xerox WorkCentre
User Guide
®
6605 Color Multifunction Printer