The System Log Screen - ZyXEL Communications P-660HN-51 User Manual

Table 86 Syslog Severity Levels
CODE
4
5
6
7

22.2 The System Log Screen

Use the System Log screen to see the system logs for the categories that you select. Click System Monitor
> Log to open the System Log screen.
Figure 108 System Monitor > Log > System Log
The following table describes the fields in this screen.
Table 87 System Monitor > Log > System Log
LABEL
Display
Clear Log
Refresh
Export Log
Email Log Now
WAN DHCP Log
SEVERITY
Warning: There is a warning condition on the system.
Notice: There is a normal but significant condition on the system.
Informational: The syslog contains an informational message.
Debug: The message is intended for debug-level purposes.
DESCRIPTION
Select a severity level from the drop-down list box. This filters search results according
to the severity level you have selected. When you select a severity, the Zyxel Device
searches through all logs of that severity or higher.
Click this to delete all the logs.
Click this to renew the log screen.
Click this to export the selected log(s).
Click this to send the log file(s) to the E-mail address you specify in the Maintenance >
Logs Setting screen.
P-660HN-51 User's Guide
Chapter 22 Logs
202