Installing Upnp In Windows Example - ZyXEL Communications P-660HN-51 User Manual

See page 92
Use the following screen to configure the UPnP settings on your Zyxel Device. Click Network Settings >
Home Networking > UPnP to display the screen shown next.
Figure 40 Network Settings > Home Networking > UPnP
The following table describes the labels in this screen.
Table 26 Network Settings > Home Networking > UPnP
LABEL
State
Apply
Cancel

7.5 Installing UPnP in Windows Example

This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
Click Start and Control Panel. Double-click Add/Remove Programs.
1
Click on the Windows Setup tab and select Communication in the Components selection box. Click
2
Details.
Chapter 7 Home Networking
for more information on UPnP.
DESCRIPTION
Select Enable to activate UPnP. Be aware that anyone could use a UPnP
application to open the web configurator's login screen without entering the Zyxel
Device's IP address (although you must still enter the password to access the web
configurator).
Click Apply to save your changes.
Click Cancel to restore your previous settings.
P-660HN-51 User's Guide
97