Navigating And Editing On The Operator Panel - Quantum Scalar i40 User Manual

Chapter 3: Understanding the User Interface
Operator Panel
Navigating and Editing
on the Operator Panel
30
Operator Panel
Element
Navigation/
Selection
Buttons
You use the four navigation/selection buttons exclusively to move
through the menus and commands on the operator panel.
From the home page, the menu bar lists the four main menu headings.
Pressing the button corresponding to a menu item brings up the list of
sub-menu items. The item you are currently on is highlighted. Press the
buttons corresponding to Up, Down, Left, or Right to navigate to a
desired menu item. As you move through the items, the highlighting
moves with you so you always know which item you are on. Press the
button corresponding to Select to select a highlighted item or action.
This in turn brings up either another sub-menu, a screen where you can
modify settings or perform operations, or a screen displaying
information.
To edit a modifiable field, such as date, time, IP address, and so on, use
the Left and Right buttons to move through the field, one digit at a
time. Use the Up and Down buttons to change each the value of each
digit or letter. When you reach the value you want, press the Right
button. As you press Right, each digit fills in. If there are multiple fields,
continue to press the Right button to go to the next field and edit it the
same way. When you reach the last digit of the last field, the Right
button designation changes to Apply. Press the Apply button. The new
information displays. Press Exit to exit. For an example, see
page 31.
Description
The physical buttons enable you navigate menus
and start and stop library operations according to
the functions listed in the button bar. Not all
buttons are functional for every operation. See

Navigating and Editing on the Operator Panel

page 30 for more information.
Quantum Scalar i40 and Scalar i80 User's Guide
on
Figure 18 on