Viewing The Date, Time, And Time Zone; Viewing Licenses; Using Advanced Reporting - Quantum Scalar i40 User Manual

Chapter 6: Getting Information About the Library

Using Advanced Reporting

Viewing the Date, Time,
and Time Zone

Viewing Licenses

Using Advanced Reporting
152
The operator panel displays the current date, time and time zone
configured on the library.
Operator Panel
Select Reports > Date/Time.
The operator panel displays a list of all the licenses currently installed on
the library: number of COD slots licensed, number of unlicensed slots,
and whether Advanced Reporting is licensed.
Operator Panel
Select Reports > Licenses.
The Advanced Reporting feature is only available if you have Advanced
Reporting licensed on the library. See
more information.
Advanced Reporting provides the following reports that you can
configure for viewing and analysis:
•
Drive Resource Utilization Report
information, showing you which tape drives are working at
optimum capacity and which are under-utilized. This can help you
allocate your tape drive resources properly.
•
Media Integrity Analysis Report
various combinations of tape drives, tape cartridges, and Tape Alert
flags. This can help you determine if a problem is due to a specific
tape drive or tape cartridge.
Licensable Features
— Provides tape drive usage
— Provides Tape Alert count for
Quantum Scalar i40 and Scalar i80 User's Guide
on page 11 for