Enabling And Creating Passwords On The Operator Panel - Quantum Scalar i40 User Manual

Enabling and Creating
Passwords on the
Operator Panel
Quantum Scalar i40 and Scalar i80 User's Guide
2 Select a user account and click Delete.
A confirmation dialog box appears.
3 Click OK.
4 Save the library configuration (see
on page 101).
If you do not set passwords on the operator panel, all users will have
access to all functions, including administrative and service functions. If
you want to restrict access to some users, you must set passwords on
the operator panel.
Passwords on the operator panel are disabled by default. Once you
enable and configure passwords on the operator panel, all users must
enter a password on the operator panel to log in. In addition, the
service login is automatically enabled and users with user or admin
privileges cannot access service functions. The service password is only
available to Quantum Support personnel.
Passwords on the operator panel are completely different and separate
from passwords on the Web client. On the Web client, you can create
and set up to 18 unique user accounts with different user names,
passwords, privileges, and partition access. On the operator panel, only
three unique accounts names are allowed, and the user names and
privileges cannot be changed (the only thing you can change is the
password on the user and admin accounts). The user names are:
User Name
admin
user
service
See Privilege Levels on page 80 for a description of administrative and
user privileges.
In order to use logins and passwords, you must set the passwords for at
least the admin account. You can only do this via the operator panel.
Chapter 4: Configuring the Library
Working With Local User Accounts
Saving the Library Configuration
Privilege Level
Administrative
User
Service — Only service users may use this
account. You may not modify the password
for this account.
83