Creating And Using A Template; Deleting Advanced Reporting Data - Quantum Scalar i40 User Manual

Chapter 6: Getting Information About the Library
Using Advanced Reporting
Creating and Using a
Template
Deleting Advanced
Reporting Data
158
If you want to use the same configuration repeatedly, you can save it as
a template. You can save up to 20 templates for each type of advanced
report. See Figure 30
1 From the report configuration page, make the selections you want.
2 In the
Report Templates
name for the template in the empty field next to the
The name can have a maximum of 15 characters. You can use only
lowercase letters, numbers, and the underscore character (_) in
template names.
3 Click . The report appears in the drop-down menu next to the
Save
button.
Load
4 To use a saved template, select the template from the drop-down
list and click
Load
5 To delete a template, select the template from the drop-down list
and click .
Delete
In some circumstances, you may wish to delete the data contained in
the library log files used to build the advanced reports. To do this, click
the button in the
Delete
configuration page. This deletes the data for both the Drive Resource
Utilization report and the Media Integrity Analysis report. See
on page 159.
Caution: Once you delete the data in the log files, you cannot get it
back. The
is recommended that you save all the data for both the
Drive Resource Utilization report and the Media Integrity
Analysis report before deleting the data. See
mailing Advanced Reporting Data
on page 159.
box at the bottom of the screen, type a
.
section of either report
Report Data
button does NOT retrieve deleted data! It
Reload
Quantum Scalar i40 and Scalar i80 User's Guide
button.
Save
Figure 30
Saving and E-
on page 157.