Downconversion; Genlock; Tc In - AJA Ki Pro Installation And Operation Manual

48

5.2 DOWNCONVERSION

6.1 GENLOCK

8.0 TC IN

5.2 DOWNCONVERSION
This parameter selects the type of downconversion from HD performed, if set up to
do so with parameters 1.6 through 1.8.
LETTERBOX (default)
CROP
ANAMORPHIC
16:9 Downconverts To
1 6
6.1 GENLOCK
This parameter selects source of reference video used to genlock to during playback.
Ki Pro always genlocks to the selected input during capture.
INPUT
CMP Y
FREERUN (default)
8.0 TC IN
This parameter selects the source of timecode from those available.
TC VALUE (default)
SDI RP188
LTC
TIME OF DAY
RS422
Image is reduced with black top and bottom added to
image area, with the aspect ratio preserved
Image is cropped to fit new screen size
HD image is converted to full-screen SD with a 16x9
aspect ratio (anamorphic)
Downconvert Illustrations—Ki Pro
Letterbox
9
Crop
Anamorphic
Use the currently selected input as the Genlock source
Use component Y as the Genlock source
Free run mode: Ki Pro syncs to its own timebase and
is not locked to an external source
Use the value specified in parameter 8.1 TC VALUE
Use the timecode read from the embedded RP188
metadata in the SDI input
Use timecode from the LTC input connector
Set to "Time of Day" clock (CONFIG parameter 55.6)
Allows Ki Pro to accept in-point timecode values for an
edit as the beginning timecode value for a recording.
These displays on 4:3
4
3