Edit From A Camcorder - JVC DR-M10 Instructions Manual

Dvd video recorder
Hide thumbs Also See for DR-M10:
Table of Contents

Advertisement

Filename [DR-M10SE_10Editing.fm]
DR-M10SE_01.book Page 80 Thursday, February 12, 2004 9:08 PM
80
EN
Edit From A
Camcorder
A
If the camcorder has no S-VIDEO output connector:
Recorder
1 STANDBY/ON
Video cable (not provided)
VIDEO OUT
Audio cable (not provided)
Camcorder
AUDIO OUT
Player
B
If the camcorder has an S-VIDEO output connector:
Recorder
1 STANDBY/ON
S-VIDEO input
S-Video cable (not provided)
S-VIDEO OUT
Audio cable (not provided)
Camcorder
AUDIO OUT
Player
Page 80
AUDIO input
REC MODE
F1
DV
DV IN
S-VIDEO
VIDEO
L(MONO)-AUDIO-R
VIDEO input
AUDIO input
REC MODE
F1
DV
DV IN
S-VIDEO
VIDEO
L(MONO)-AUDIO-R
You can use a camcorder as the source player and your
unit as the recording deck.
Slide the TV/CABLE/SAT/DVD switch to DVD.
A
Make connections.
A If the camcorder has no S-VIDEO output connector:
— connect the camcorder's AUDIO OUT and VIDEO
OUT connectors to the unit's AUDIO and VIDEO
input connectors on the front panel.
B If the camcorder has an S-VIDEO output connector:
— connect the camcorder's AUDIO OUT and
S-VIDEO OUT connectors to the unit's AUDIO and
S-VIDEO input connectors on the front panel.
When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your unit.
B
Set the unit's input mode.
Press PR +/– to set the channel to "F-1".
Set "F-1 INPUT" to "VIDEO" for the VIDEO input connector,
or "S-VIDEO" for the S-VIDEO input connector, depending on
the connector being used. (
(F-1 INPUT)")
C
Set the recording speed.
Press REC MODE repeatedly until the desired recording
speed appears.
D
Prepare the camcorder for dubbing.
Start playback on the camcorder slightly before the actual
point from where you wish to start dubbing.
E
Start dubbing.
Press and hold 7, then press 4 on the remote control, or
press 7 on the unit.
F
Stop dubbing.
Press 8 on the unit, then stop playback on the
camcorder.
NOTES:
All necessary cables can be obtained from your dealer.
Refer to the camcorder's instruction manual for operating
procedure.
The quality of dubbed picture becomes poorer than that of the
original.
Masterpage:Left+
EDITING (cont.)
pg. 83, "F-1 Input Setting
February 12, 2004 5:23 pm

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dr-m7s

Table of Contents