Programme Playback; Random Playback; Slide Show - JVC DR-M10 Instructions Manual

Filename [DR-M10SE_07Playback.fm]
DR-M10SE_01.book Page 46 Thursday, February 12, 2004 9:08 PM
46
EN

Programme Playback

You can play back up to 30 tracks in the desired order.
While stopped
1
Access Play Set Up Menu.
Press ON SCREEN twice.
2
Select the menu item.
Press w e to select "PRGM", then press ENTER.
The programme table appears under Play Set Up Menu.
3
Select the tracks in the desired order.
Use number keys (1–9, 0) to enter the track numbers.
Examples:
To select track 5, press the number key "5" and ENTER.
To select track 15, press the number key "1" and "5".
To select track 25, press the number key "2" and "5".
If you have specified a wrong selection
Press &. The last selection is erased.
Or press 8. The whole selection is erased.
4
Start playback.
Press 4. Playback starts in the programmed order.
When all of the programmed tracks have been played back,
Programme Playback stops, but the programmed information
remains.
To add tracks to the end of the programme, perform steps 1
through 3.
During Programme Playback, pressing 6 skips to the next
selection of the programme. Pressing 2 returns to the
beginning of the current selection.
To clear Play Set Up Menu and the contents of the
programme from the screen
Press ON SCREEN.
To cancel Programme Playback
Press w e to select "PRGM", then press ENTER.
NOTE:
Programme Playback is not possible depending on the type of
disc.
Page 46
PLAYBACK OPERATIONS (cont.)

Random Playback

You can play back all the tracks on the disc in random order.
While stopped
1
Access Play Set Up Menu.
Press ON SCREEN twice.
2
Select the menu item.
Press w e to select "RND", then press ENTER.
Playback starts in random order.
To clear Play Set Up Menu and the contents of the
programme from the screen
Press ON SCREEN.
To cancel Random Playback
Perform steps 1 and 2.
NOTE:
The same track will not be played back more than once during
Random Playback.
Select the switching interval of the

slide show

You can control the switching interval of the slide show.
1
Access Play Set Up Menu.
Press ON SCREEN twice.
2
Select the menu item.
Press w e to select " ", then press ENTER.
The pop-up window appears under the selected item.
3
Select the desired option.
Press rt to select the desired option, then press ENTER.
Each time you press rt, the interval changes as follows:
5 SEC. { 10 SEC. { 15 SEC. { 20 SEC. { 25 SEC. {
30 SEC. { (Back to the beginning)
Masterpage:Left+
February 12, 2004 5:09 pm