Move Scenes - JVC DR-M10 Instructions Manual

Filename [DR-M10SE_09Navigation.fm]
DR-M10SE_01.book Page 71 Thursday, February 12, 2004 9:08 PM
H
Return to the normal screen.
Press NAVIGATION.
NOTES:
There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually
edited.
The title, index and category of the play list can be modified in
the same way as "ORIGINAL". (
Information")
You can modify the play list that has just been created here by
adding, moving, or deleting unwanted parts to create a digest
edition, etc.
Add scenes to a play list
Perform steps A to C of "Create Play List" (
continuing.
A
Select a play list.
Press w e to move the arrow to the play list to which you
wish to add a scene, then press t.
B
Access the Editing screen.
A Press w e to move the
arrow to "EDITING", then
press ENTER.
B Press w e to move the
arrow to "ADD SCENE".
C
Start playback.
Press 4 to start playback. The playback pictures appear
in the window on the screen. The elapsed playing time
starts counting with the arrow on "IN".
To locate the beginning of other titles, press 2/6.
D
Set edit-in and edit-out points.
A Find the point where you want the added scene to
begin, then press ENTER with the arrow on "IN". The
edit-in time is fixed and the elapsed playing time starts
counting again.
B Find the point where you want the added scene to
end, then press ENTER with the arrow on "OUT". The
edit-out time is fixed.
Press 3, 4, 5, 2, 6 or 9 to find the edit-in and
edit-out points.
Page 71
E
A Press w e to move the arrow to "PREVIEW", then
B Press w e to select "EXECUTE", then press ENTER.
To modify the points
pg. 67, "Modify Original
A Press w e to move the arrow to "CLEAR", then press
B Repeat step C – E.
F
Press NAVIGATION.
NOTE:
pg. 70) before
There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually edited.

Move scenes

A
Press w e to move the arrow to a play list into which you
wish to move a scene, then press t.
B
A Press w e to move the
B Press w e to move the
C
Press 4 to start playback. The playback pictures appear
in the window on the screen. The elapsed playing time
starts counting with the arrow on "IN".
Confirm the addition.
press ENTER to preview approximately 5 seconds
before and after the edited scene.
The selected scene is added.
ENTER.
Return to the normal screen.
Perform steps A to C of "Create Play List" (
continuing.
Select a play list.
Access the Editing screen.
arrow to "EDITING", then
press ENTER.
arrow to "MOVE SCENE".
Start playback.
To locate the beginning of other titles, press 2/6.
Masterpage:Right-No-Heading
71
EN
pg. 70) before
February 12, 2004 5:18 pm