Connecting/Using A Decoder - JVC DR-M10 Instructions Manual

Filename [DR-M10SE_10Editing.fm]
DR-M10SE_01.book Page 90 Thursday, February 12, 2004 9:08 PM
90
EN
Connecting/Using
A Decoder
RF cable
TV aerial
(provided)
cable
L-1 IN/OUT
L-2 IN/DECODER
Page 90
The L-2 IN/DECODER connector can be used as an input
connector for an external decoder (descrambler). Simply
connect a decoder and you can enjoy a variety of
programming that is available through scrambled
channels.
A
Set "L-2 SELECT" to "DECODER". (
B
TV receiver
Connect your unit's L-2 IN/DECODER connector to the
decoder's 21-pin SCART connector using a 21-pin SCART
cable.
C
Perform the procedure as described in "When Receiving
A Scrambled Broadcast" on page 101.
Decoder
SYSTEM CONNECTIONS (cont.)
Select the input mode.
Connect the decoder.
Set the tuner.
February 12, 2004 5:23 pm
Masterpage:Left+
pg. 83)