JVC DR-M10 Instructions Manual page 89

Filename [DR-M10SE_10Editing.fm]
DR-M10SE_01.book Page 89 Thursday, February 12, 2004 9:08 PM
Perfect Connections (Recommended)
This is an example of recommended connections if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver's connector
if you have a decoder, L-1 IN/OUT connector to TV's
connector, and L-2 IN/DECODER connector to the
satellite receiver's connector. Then connect the satellite
receiver and TV.
Satellite receiver
Decoder
Page 89
Outdoor unit
Aerial
Satellite cable
NOTES:
Set "L-2 SELECT" to "VIDEO" or "S-VIDEO". (
You can use the Automatic Satellite Programme Recording
function ( pg. 63) with this connection.
To record a programme via the satellite receiver, select L-2
mode by pressing PR +/– so that "L-2" appears on the front
display panel.
To receive a scrambled broadcast, descramble the signal with
the decoder connected to the satellite receiver.
For details, refer to the instruction manual of the satellite
receiver and decoder.
21-pin SCART connector
Back of TV
TV aerial cable
ANTENNA IN
ANTENNA OUT
Mains outlet
Back of unit
Masterpage:Right-No-Heading
89
EN
pg. 83)
Aerial connector
February 12, 2004 5:23 pm