Recording Features - JVC DR-M10 Instructions Manual

Filename [DR-M10SE_08Recording.fm]
DR-M10SE_01.book Page 52 Thursday, February 12, 2004 9:08 PM
52
EN

Recording Features

1 STANDBY/ON
TV
TV AV/
VIDEO
GHI
PQRS
CANCEL
SHOW VIEW/
VIDEO Plus +
TOP MENU
MENU
PREVIOUS
SLOW
REC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
DISPLAY
Recording Speed
MPEG2 format is used as recording format. As a guide for picture
quality, the "bps" unit is used to represent how much data can
be recorded per second. The larger this value is, the better the
picture quality becomes but more capacity is required for the
recording. Select XP or SP for programmes where quick
movement occurs, such as sports programmes, and LP or EP for
talk shows, etc. with relatively less movement.
The recording speeds for a 4.7 GB disc are set as follows:
Recording Recording amount
speed (approx.)
XP 10 Mbps
SP 5 Mbps
LP 2 Mbps
EP 1.6 Mbps
FR60–FR360 The amount varies
( pg. 53) depending on the
selected time.
FR420
FR480
Page 52
VIDEO
7
REC MODE
SAT #
VIDEO
PULL - OPEN
F1 DV DV IN
S-VIDEO VIDEO L(MONO)-AUDIO-R
CABLE/SAT
TV DVD
STANDBY/ON
TV AV TV/CBL/SAT DVD
VIDEO
ABC DEF TV%
JKL MNO
PR
TUV WXYZ
PR +/–
AUX MEMO/MARK
PROG/CHECK SAT# TIMER
NAVIGATION
ENTER
RETURN
NEXT
PLAY/SELECT SLOW
CLEAR
STOP/ PAUSE
OPEN/
CLOSE
PROGRESSIVE
Maximum recording
time (approx.)
1 hour
2 hours
4 hours
6 hours
1 – 6 hours
7 hours
8 hours
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the unit off after
recording is finished.
1
Start recording.
Press 7 on the unit.
2
Engage the ITR mode.
Press 7 again. On the front display panel, "0:30"
appears.
3
Set the recording duration.
If you want to record for more than 30 minutes, press 7
to extend the time. Each press extends recording time by
30 minutes.
NOTES:
You can only perform ITR using the 7 button on the unit's
front panel.
If "DIRECT REC" is set to "ON" in the menu, Instant Timer
Recording (ITR) function does not work. (
Watch Another Programme While
Recording on the Unit
While recording is going on, you can watch another programme
on the TV by using the TV's tuner. It is required that the remote
control is set to be able to operate the TV in advance.
( pg. 86, "TV Multi-Brand Remote Control")
1
Switch the TV to TV mode.
During recording, press TV AV/VIDEO to select TV
mode.
Video mode is disengaged and the video indicator on the unit
is turned off.
The programme received on the TV's tuner is displayed on the
TV screen.
2
Switch the remote control to TV control mode.
Slide the TV/CABLE/SAT/DVD switch to TV.
3
Select the desired channel.
Press PR +/– repeatedly.
NOTE:
If a decoder is connected to the unit (
a scrambled channel as well as other normal channels.
Elapsed Recording Time and Disc
Remaining Time Indication
During recording, press DISPLAY repeatedly until the
desired indication appears on the front display panel.
Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time ] Disc remaining time ] Clock ]
(Back to the beginning)
Masterpage:Left+
RECORDING (cont.)
pg. 94)
pg. 90), you can select
February 12, 2004 5:15 pm