JVC DR-M10 Instructions Manual page 96

Filename [DR-M10SE_11Subsidiary.fm]
DR-M10SE_11Subsidiary.fm Page 96 Friday, March 5, 2004 2:32 PM
96
EN
OTHERS
(The boldface settings in the table below indicate the settings at your purchase.)
8 AUTO TIMER
OFF
ON
8 RESUME
ON
OFF
DISC RESUME
Page 96
When this function is set to "ON", the timer is automatically engaged when the
unit power is turned off, and automatically disengaged when the unit is
powered back on.
NOTE:
For safety, when "AUTO TIMER" is set to "OFF", all other functions are disabled while the
Timer mode is engaged. To disengage the timer, press # (TIMER).
When this function is set to "ON" or "DISC RESUME", you can use the resume
function. ( pg. 31)
ON: You can start playback from the resume point of the placed
disc.
OFF: You cannot use the resume function.
DISC RESUME:
The unit retains a memory of the resume points of the last 30
discs played back, even though they have been ejected.
NOTE:
"DISC RESUME" setting works on DVD VIDEO, VCD, SVCD and already finalised
DVD-R/DVD-RW (video mode) discs. For other types of discs, the function under "ON"
setting will be applied even if "RESUME" is set to "DISC RESUME".
Masterpage:Left+
SUBSIDIARY SETTINGS (cont.)
March 5, 2004 2:31 pm