Edit From A Camcorder - JVC DR-DX5SU Instructions Manual

Mini dv & dvd & hdd video recorder
Hide thumbs Also See for DR-DX5SU:
Table of Contents

Advertisement

EDITING
62
EN

Edit From A Camcorder

You can use a camcorder as the source player and your unit as the
recording deck. If your camcorder has a DV IN/OUT connector, you
can use the camcorder as the recording deck and your unit (DV
deck only) as the source player.
A If the camcorder has no S-VIDEO output connector:
To [VIDEO/AUDIO
((MONO) L/R)] input
Audio/video cable
(not supplied)
Player
B If the camcorder has an S-VIDEO output connector:
To [S-VIDEO]
To [AUDIO] input
input
S-video cable
(not supplied)
Player
C If the camcorder has a DV IN/OUT connector:
Recorder/Player
Recorder
AUDIO/VIDEO OUT
Recorder
S-VIDEO
Audio cable
OUTPUT
(not
supplied)
AUDIO OUTPUT
To [DV IN]
DV cable
(VC-VDV 204U)
(not supplied)
DV connector
Player/Recorder
Slide the TV/CABLE/DBS/DVD switch to DVD.
1
Make connections.
A If the camcorder has no S-VIDEO output connector:
^ connect the camcorder's AUDIO/VIDEO OUT connectors to
the unit's [VIDEO/AUDIO ((MONO) L/R)] input connectors
on the front panel.
When using a monaural camcorder, connect its AUDIO OUT
connector to the [AUDIO-L] input connector on your unit.
B If the camcorder has an S-VIDEO output connector:
^ connect the camcorder's AUDIO OUT and S-VIDEO OUT
connectors to the unit's [AUDIO] and [S-VIDEO] input
connectors on the front panel.
C If the camcorder has a DV IN/OUT connector:
^ connect the camcorder's DV IN/OUT connector to the unit's
[DV IN/OUT] connector.
When using your unit as the source player, refer to the
camcorder's instruction manual for the recording procedure.
2
Press DV/HDD/DVD SELECT on the unit repeatedly to select
the recording deck.
3
Press CH +/– to select AF-1B or ADVB.
Set AFRONT AUX F-1B to AVIDEOB for the [VIDEO] input
connector, or AS-VIDEOB for the [S-VIDEO] input connector,
depending on the connector being used. (A pg. 72)
4
Press REC MODE repeatedly to set the recording mode. For
DV deck, press REC MODE on the remote control to set the
recording mode.
5
Start playback on the camcorder slightly before the actual point
from where you wish to start dubbing.
6
Press R on the unit to start recording. Or while holding R, press
I on the remote control. The dubbing starts.
7
Press o on the unit, then stop playback on the camcorder.
NOTES:
All necessary cables can be obtained from your dealer.
Refer to the camcorder's instruction manual for operating
procedure.
The quality of dubbed picture becomes poorer than that of the
original.
When you are editing through the [DV IN/OUT] connector, the
unit will stop if the player begins playing a blank portion of tape or
the signal is interrupted.
When connecting the unit to a device equipped with a DV input
connector, be sure to use the optional DV cable (VC-VDV 204U).
To edit through the [DV IN/OUT] connector using the HDD or
DVD deck, refer to ADV Dubbing (HDD & DVD Deck Only)B
(A pg. 60).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dr-dx5sekDr-dx5selDr-dx5seuDr-dx5seyDr-dx5sezDr-dx5sus

Table of Contents