Scan Mode Set; Tray Lock - JVC DR-M10 Instructions Manual

Filename [DR-M10SE_11Subsidiary.fm]
DR-M10SE_11Subsidiary.fm Page 108 Friday, February 13, 2004 4:07 PM
108
EN

Scan Mode Set

You can select the scan mode from two modes: Interlaced
scan mode which is used in the conventional TV system,
and Progressive scan mode which enables reproduction
of higher-quality images. For details, refer to
"GLOSSARY" ( pg. 113).
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/SAT/DVD switch to DVD.
A
Set the scan mode.
ATTENTION:
Your TV needs to be compatible with PAL Progressive.
Press PROGRESSIVE SCAN for 3 or more seconds.
Video output indicator (
Progressive scan mode has been established. (
Each press of PROGRESSIVE SCAN for 3 or more seconds
switches the scan mode.
NOTES:
When the progressive mode is set, be sure to set "L-1
OUTPUT" to "COMPONENT". (
L-1 Input Setting (L-1 OUTPUT and L-1 INPUT)") Progressive
scan is output only from COMPONENT VIDEO OUT
connector.
Interlaced scan mode is the setting at your purchase.
When Progressive scan mode is engaged, no video signal is
output from S-VIDEO OUT connector and L-1 IN/OUT
connector.
Interlaced scan mode might be suitable depending on video
material.
Scan mode cannot be set while menu screen is displayed.
Page 108
) lights on the front display panel if
pg. 13)
pg. 82, "L-1 Output and
SUBSIDIARY SETTINGS (cont.)

Tray Lock

You can lock the disc tray to prohibit the unwanted disc
ejection by children.
Turn off the unit.
A
Lock the disc tray.
While the unit is turned off, press and hold 8, then press
x on the unit. "LOCK" appears on the front display
panel.
If you try to eject the discs, "LOCK" appears and indicates that
tray is locked.
To unlock tray
While the unit is turned off, press and hold 8, then press
x on the unit. "UNLOCK" appears on the display panel.
Masterpage:Left+
February 13, 2004 4:07 pm