Disassembling And Rinsing The Professional Cappuccino Frother - Jura IMPRESSA S9 One Touch Manual

Cleaning the cappuccino
frother after a prompt
Disassembling and
rinsing the
Professional
Cappuccino Frother
T Place another receptacle under the frother.
c T Press the maintenance button.
CAPPUCCINO
cleaned.
WATER FOR CAPPUCCINO
lights up.
T Rinse the receptacle thoroughly, fill it with approx. 250 ml
of fresh water and immerse the milk pipe in the water.
T Empty the other receptacle and place it under the frother
once more.
c T Press the maintenance button.
CAPPUCCINO
with fresh water.
COFFEE READY
is once more ready to use.
If milk has been prepared, but the cappuccino frother has not been
cleaned, the
CLEAN CAPPUCCINO
the machine is switched off. The maintenance programme can be
started by pressing the maintenance button c.
Precondition:
CLEANER FOR CAPPU.
maintenance button c lights up.
T Continue with the fifth prompt to take action (indicated
by a T), as is described under 'Cleaning the cappuccino
frother – manually'.
T Carefully remove the frother from the Connector System
by twisting slightly.
T Dismantle the frother completely.
T Rinse all the frother parts thoroughly under running water.
T Reassemble the frother.
/ , the frother and pipe are
CLEANS
, the maintenance button c
/ , the frother and pipe are rinsed
CLEANS
appears on the display. Your IMPRESSA
prompt is displayed when
6 Maintenance
is displayed and the
61
©