Using And Activating Filter - Jura IMPRESSA S9 One Touch Manual

Using and
activating filter
T Place a receptacle under the hot water spout and another
under the frother.
c T Press the maintenance button.
SYSTEM FILLS
maintenance button flashes. A small amount of water flows
from the frother and the hot water spout.
This operation stops automatically.
appears on the display.
HEATING UP
PRESS RINSE
T Place a receptacle under the coffee spout.
c T Press the maintenance button.
The machine rinses itself, stopping automatically.
COFFEE READY
is ready to use.
E After first-time use do not disconnect the IMPRESSA from the
power supply for 24 hours to ensure that it is in the optimum
operating condition.
E When a coffee speciality has been prepared for the first time,
it is possible that
the grinder has not yet been completely filled with coffee
beans. In this case prepare a different coffee speciality.
E If you have not been able to use the machine for the first time
correctly and fully, contact Customer Support in your country
(see 'JURA contact details / Legal information').
Your IMPRESSA no longer has to be descaled if you are using CLARIS
filter cartridges.
@ You can also try out the 'Insert filter' operation online. Visit the
Knowledge Builder at www.jura.com.
E Perform the 'Insert filter' operation without interruptions. This
will ensure that your IMPRESSA always produces its best.
2 Preparing and using your IMPRESSA for the first time
, the system fills up with water and the
, the maintenance button c lights up.
appears on the display. Your IMPRESSA
is shown on the display as
FILL BEANS
WELCOME TO JURA
19