Dispensing Hot Milk With The Professional Cappuccino Frother; Cleaning Of The Professional Cappuccino Frother; Rinsing The Professional Cappuccino Frother; Cleaning The Professional-Cappuccino Frother - Jura IMPRESSA F90 Instructions For Use Manual

A useful addition is available for all lovers of milk speciali-
ties in the form of high-quality vacuum milk containers.
They keep the milk cool the whole day long and are opti-
mally suited to the design of your IMPRESSA.
All original JURA accessories can be obtained from the
specialist shop.
Turn the selector switch of the Professional Cappuccino Frother
(14) to the milk foam position (Fig. 17).
PLEASE SELECT
Press the steam portion draw off key (13).
MACHINE HEATING UP
PLEASE SELECT
Press the steam portion draw off key (13) again.
STEAM PORTION
Preparation of milk foam will continue for the period you have
programmed for the steam portion. (See "Programming steam
portion" Chapter 13.7).
Adjust the steam dispensing time to suit the size of your cup.
You can also abort the dispensing, by pressing the steam
portion draw-off button
Now, move your cup with the milk foam and place it under the
coffee spout and dispense the required coffee product (Fig. 12).
Your Cappuccino is ready.
14
early.
11.1 Dispensing Hot Milk with the
Professional Cappuccino Frother
Turn the selector switch of the Professional Cappuccino
Frother (14) to the milk range (Fig. 19).
The procedure for dispensing hot milk is the same as the
procedure for dispensing milk foam for Cappuccino (Chapter
11).
11.2 Cleaning of the
Professional Cappuccino Frother
To ensure that the Professional Cappuccino Frother functions
perfectly, you should rinse it with water each time after
preparing milk.
You will not be prompted by your IMPRESSA to rinse the
Professional Cappuccino Frother.

11.3 Rinsing the Professional Cappuccino Frother

Carefully pull off the Professional Cappuccino Frother from your
IMPRESSA.
Dismantle the Professional Cappuccino Frother (14) into its indi-
vidual parts (Fig. 15).
Thoroughly rinse all parts of the nozzle under running water.
Reassemble the Professional Cappuccino Frother (14) and refit it
on to your IMPRESSA.
11.4 Cleaning the Professional Cappuccino Frother
To ensure that the Professional Cappuccino Frother (14)
functions perfectly, you should clean it daily if you have pre-
pared milk foam or hot milk.
You will not be prompted by your IMPRESSA to clean the
Professional Cappuccino Frother (14).