Hot Water - Jura IMPRESSA S9 One Touch Manual

Foaming milk with the
Easy Cappuccino Frother

Hot water

CAUTION
Precondition:
COFFEE READY
T Take the protective cover off the frother.
T Attach the milk pipe to the frother. For a milk carton/bottle
use the long pipe, for a milk container the short pipe.
T Insert the other end into a milk carton/bottle or connect it to
the milk container.
T Place a cup under the frother.
ö T With the selector switch select the milk portion symbol z.
ä T Press the selector switch.
, the milk foam is being prepared. Preparation stops
MILK
automatically when the pre-set amount of milk is reached.
COFFEE READY
To ensure that the frother works perfectly, you should rinse and
clean it regularly. The description for this can be found in Chapter 6
'Maintenance – Cappuccino frother'.
Hot water can be prepared in two ways:
Hot water portion a
Z
The pre-set amount of water flows into the cup.
U
Hot water m
Z
Water flows out of the hot water spout until preparation is
U
interrupted by pressing any button.
The following temperatures can be selected for preparing hot
water:
Low
Z
Normal
Z
X high
Z
There is a danger of scalding from hot water splashes.
Avoid direct contact with the skin.
T
4 Preparation at the touch of a button
is displayed.
is shown on the display.
39