Entering A Permanent Setting For The Amount Of Water For A Cup Size - Jura IMPRESSA S9 One Touch Manual

Changing the amount of
water during preparation
Entering a permanent
setting for the amount
of water for a cup size
k T Turn the Rotary Switch while
displayed.
A LA CARTE öööö
into the cup. Preparation stops automatically.
appears on the display.
played.
The pre-set amount of water of all coffee products can be changed
during the brewing operation by turning the Rotary Switch.
Example: Proceed as follows to prepare a
Precondition:
COFFEE READY
T Place a cup under the coffee spout.
T Open the cover of the Rotary Switch.
o T Press the 1 Coffee button.
1 COFFEE
The brewing operation starts and the coffee flows into the
cup.
g T Turn the Rotary Switch during the brewing operation until
1 COFFEE
The set amount of water flows into the cup. Preparation
stops automatically.
COFFEE READY
It is easy to make permanent settings for the amount of water for all
coffee specialities, cappuccino, latte macchiato, a portion of hot
water and portion of milk according to the cup size. As in the follow-
ing example, adjust the amount of water once. Every time you pre-
pare a drink in the future, this amount of water will be dispensed.
Making the permanent settings for the amount of water for the
respective cup size always follows this model.
3 Familiarising yourself with the control options
A LA CARTE öööö
, the pre-set amount of water flows
COFFEE READY
is displayed.
and the pre-set coffee strength is displayed.
/ is displayed.
110 ML
appears on the display.
ENJOY
is then displayed.
ENJOY
is then dis-
cup of coffee.
110 ML
is
27