Determining And Adjusting The Degree Of Water Hardness - Jura IMPRESSA S9 One Touch Manual

Determining and
adjusting the degree
of water hardness
Filter rinsing stops automatically after approx. 500 ml.
COFFEE READY
activated.
The harder the water is, the more frequently the IMPRESSA needs to
be descaled. It is therefore important to adjust the water hardness.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH. This can also be deactivated, which means that
the IMPRESSA will not let you know when it has to be descaled.
E However, if you are using the CLARIS filter cartridge and have
activated it, you will not be able to adjust the water
hardness.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
T Hold the test strip briefly (for one second) under flowing
water. Shake off the water.
T Wait for about one minute.
T You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
You can now adjust the water hardness.
Example: To change the water hardness from
proceed as follows:
Precondition:
COFFEE READY
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
appears.
g T Turn the rotary switch until
displayed.
k T Press the Rotary Switch to enter the programme item.
16°dH
g T Turn the Rotary Switch until
2 Preparing and using your IMPRESSA for the first time
appears on the display. The filter is now
is displayed.
HARDNESS 16°dH
25°dH
to ,
16°dH 25°dH
MAINTENANCE
is displayed.
21
is