Energy-Saving Mode (Energy Save Mode, E.s.m. © ) - Jura IMPRESSA S9 One Touch Manual

5 Permanent settings in programming mode
Energy-saving mode
(Energy Save Mode,
E.S.M. )
©
44
The values of 1 Espresso are then reset to the works setting.
The IMPRESSA is switched off (standby).
You can also set various energy-saving modes on your IMPRESSA:
Z
SAVE NO
Your IMPRESSA is continuously ready for use.
U
All coffee and milk products, as well as hot water, can be
U
prepared without having to wait.
Z
SAVE LEVEL 1
Your IMPRESSA is only continuously ready for use for coffee
U
products and hot water.
The machine has to heat up before milk preparation.
U
Z
SAVE LEVEL 2
Approx. 5 minutes after the last preparation the IMPRESSA
U
switches to the energy-saving temperature and is not ready
for use.
Before coffee, hot water or milk can be prepared, the machine
U
has to heat up.
Example: Proceed as follows to change the energy-saving mode
from to
SAVE NO
Precondition:
COFFEE READY
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
appears.
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to enter the programme item.
SAVE NO
g T Turn the Rotary Switch until
played.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED w
ECONOMY MODE 1
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
.
SAVE LEVEL 1
is displayed.
SAVE LEVEL 1
appears briefly on the display.
EXIT
MAINTENANCE
ECONOMY MODE -
is displayed.
is
is dis-