Permanent Settings In Programming Mode - Jura IMPRESSA S9 One Touch Manual

3 Familiarising yourself with the control options
Permanent settings in
programming mode
Programme item
MAINTENANCE
28
Example: To make permanent settings for the amount of water for
an espresso, proceed as follows:
Precondition:
T Place an espresso cup under the coffee spout.
i T Press and hold the 1 Espresso button.
1 ESPRESSO
i T Hold the Espresso button down until
appears.
i T Release the 1 Espresso button.
Coffee preparation will start and the espresso will flow into
the cup.
T Press any button as soon as enough espresso has flowed
into the cup.
Preparation stops automatically.
briefly on the display. The set amount of water for an espres-
so will be permanently stored.
displayed.
E You can alter these settings at any time by repeating the
above procedure.
You can easily adjust your IMPRESSA to your personal coffee blends
and specialities. You can navigate through the easy-to-understand
programme steps and make permanent settings simply by turning
and pressing the Rotary Switch.
You can make the following permanent settings with the Rotary
Switch:
Subitem
CLEAN CAPPUCCINO
RINSE MACHINE
RINSE CAPPUCCINO
CLEAN MACHINE
DECALCIFY MACHINE
CHANGE FILTER
COFFEE READY
and the coffee strength is displayed.
Explanation
, T Select the desired maintenance
, programme.
, If no action is taken, programming mode
, is exited in the
, programme item automatically after
approx. five seconds.
is displayed.
ENOUGH COFFEE?
CONFIRMED w
COFFEE READY
MAINTENANCE
appears
is then