Jura IMPRESSA S9 One Touch Manual page 59

Rinsing following a prompt
Starting rinsing manually
It can be set in programming mode whether the rinsing prompt is
displayed immediately or 10 minutes after preparation (refer to
Chapter 5 'Permanent settings in programming mode – Rinses').
Precondition:
COFFEE READY
displayed and the maintenance button c lights up.
T Place a receptacle under the frother.
E If you are using the Professional Cappuccino Frother, turn
the selection lever to the steam position n.
c T Press the maintenance button.
CAPPU. RINSING
The procedure stops automatically.
appears on the display.
You can initiate the 'Rinsing the cappuccino frother' operation
manually.
Precondition:
COFFEE READY
T Place a receptacle under the frother.
E If you are using the Professional Cappuccino Frother, turn
the selection lever to the steam position n.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
appears.
k T Press the Rotary Switch to enter the programme item.
CLEAN CAPPUCCINO
g T Turn the Rotary Switch until
displayed.
k T Press the Rotary Switch to start the rinse operation.
CAPPU. RINSING
The procedure stops automatically.
appears on the display.
/
RINSE CAPPUCCINO
, the frother is rinsed.
COFFEE READY
is displayed.
MAINTENANCE
RINSE CAPPUCCINO
, the frother is rinsed.
COFFEE READY
6 Maintenance
is
is
59