Jura IMPRESSA S9 One Touch Manual
  1. Manuals
  2. Brands
  3. Jura Manuals
  4. Coffee Maker
  5. IMPRESSA S9 One Touch
  6. Manual

Jura IMPRESSA S9 One Touch Manual

Hide thumbs Also See for IMPRESSA S9 One Touch:
Table of Contents

Advertisement

Quick Links

See also: Manual for Use , Quick Reference Manual

The IMPRESSA S9 One Touch Manual

The 'IMPRESSA Manual' has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.

Advertisement

Table of Contents
loading

Related Manuals for Jura IMPRESSA S9 One Touch

Summary of Contents for Jura IMPRESSA S9 One Touch

  • Page 1: The Impressa S9 One Touch Manual

    The IMPRESSA S9 One Touch Manual The ‘IMPRESSA Manual’ has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.

  • Page 2: Table Of Contents

    Table of contents Your IMPRESSA S9 One Touch IMPORTANT SAFEGUARDS Control elements Proper use For your safety The IMPRESSA S9 One Touch Manual Symbol description ............................14 IMPRESSA S9 One Touch Connector System ............................16 © JURA on the Internet ............................16 Knowledge Builder ............................16 Preparing and using for the first time Setting up ..............................17...
  • Page 3 Disassembling and rinsing the Easy Cappuccino Frother..............62 Cleaning the bean container ........................62 Descaling the water tank ...........................63 Display messages Troubleshooting Transport and environmentally neutral disposal Transport/Emptying the system .......................68 Disposal .................................68 10 Technical data Index JURA contact details / Legal information...

  • Page 4: Important Safeguards

    Important Safeguards IMPORTANT SAFEGUARDS These safeguards apply for machines with UL safety test (see rating plate and chapter 10, ‘Technical data’). Follow the basic safety When using electrical appliances, basic safety precautions should precautions always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Read all instructions.
  • Page 5 Important Safeguards Special cord set instructions a. A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a long cord. Your IMPRESSA has a 3-pin grounded plug. b. Longer extension cords are available and may be used if care is exercised in their use.
  • Page 6 Important Safeguards Keep your hands and the cord away from hot parts of the appliance during operation. Never clean with scouring powders or hard implements. NEVER DO Never fill instant coffee, chocolate mix etc. into the grinder or (or you will void your ground coffee funnel (grunder by-pass).
  • Page 7 Important Safeguards...

  • Page 8: Control Elements

    Control elements Control elements Figure: IMPRESSA S9 Platinum Bean container cover Fineness of grind switch Bean container with aroma preservation Cup tray cover Cover of filler funnel for pre-ground coffee Water tank with handle Filler funnel for pre-ground coffee Power switch and power cable Connector System for removable ©...
  • Page 9 Control elements Front left Front right Display ö Selector switch Professional Cappuccino Frother Rotary Switch cover f Rotary switch Easy Cappuccino Frother On/off button Hot water portion symbol Maintenance button Hot water symbol 1 Espresso button Cappuccino button 2 Espressi button Milk portion symbol 1 Coffee button Milk symbol...

  • Page 10: Proper Use

    JURA service centre. If the power cable for this machine is damaged, it must be repaired either directly by JURA or by a JURA approved service centre. Make sure that the IMPRESSA and the power cable are not located close to hot surfaces.
  • Page 11 The rating plate is located on the underside of your IMPRESSA. Further technical data is given in Chapter 10 ‘Technical Data’. Use only original JURA care products. Use of accessories that are not explicitly recommended by JURA could damage the IMPRESSA.
  • Page 12 Important information Safe handling of the CLARIS filter cartridges: Filter cartridges should be kept out of the reach of children. Store them dry in the sealed package. Protect them from heat and direct sunlight. Do NOT use damaged filter cartridges. Do NOT open filter cartridges.

  • Page 13: The Impressa S9 One Touch Manual

    The IMPRESSA S9 One Touch Manual The IMPRESSA S9 One Touch Manual You are holding the manual for your IMPRESSA S9 One Touch in your hand. It will help you to familiarize yourself with your IMPRESSA safely and quickly and teach you the full range of facilities it offers.

  • Page 14: Symbol Description

    The IMPRESSA S9 One Touch Manual Symbol description Warnings Always take note of any information marked with the CAUTION or WARNING symbol. The signal word WARNING points out potential risk CAUTION of serious injury, and the signal word CAUTION potential risk of slight injury.

  • Page 15: Impressa S9 One Touch

    1 IMPRESSA S9 One Touch IMPRESSA S9 One Touch Coffee that fulfils your With the new flagship of the IMPRESSA S range, cappuccino and wildest dreams latte macchiato are prepared at the touch of a button without you having to move the cup. With its elegant platinum styling and...

  • Page 16: Connector System

    Cappuccino/latte macchiato JURA on the Internet Visit us on the Internet. @ At www.jura.com you will find interesting and up-to-date information on your IMPRESSA and on every aspect of coffee. Knowledge Builder You can familiarize yourself with your IMPRESSA S9 in a fun way on the PC.

  • Page 17: Preparing And Using For The First Time

    2 Preparing and using your IMPRESSA for the first time 2 Preparing and using for the first time This chapter provides you with the information you need to use your IMPRESSA without any problems. You will prepare your IMPRESSA step-by-step for your first coffee experience. Setting up When setting up your IMPRESSA, please note the following: Set the IMPRESSA down on a horizontal surface that is not...

  • Page 18: First-Time Use

    2 Preparing and using your IMPRESSA for the first time First-time use If the machine is operated with a defective power cable, there is a danger of electric shock. Never use a machine which has a defective power cable. WARNING Precondition: The water tank and bean container are full.

  • Page 19: Using And Activating Filter

    E If you have not been able to use the machine for the first time correctly and fully, contact Customer Support in your country (see ‘JURA contact details / Legal information’). Using and Your IMPRESSA no longer has to be descaled if you are using CLARIS activating filter filter cartridges.
  • Page 20 2 Preparing and using your IMPRESSA for the first time Precondition: is displayed. COFFEE READY T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until MAINTENANCE appears on the display. g T Turn the Rotary Switch until is displayed.

  • Page 21: Determining And Adjusting The Degree Of Water Hardness

    2 Preparing and using your IMPRESSA for the first time Filter rinsing stops automatically after approx. 500 ml. appears on the display. The filter is now COFFEE READY activated. Determining and The harder the water is, the more frequently the IMPRESSA needs to adjusting the degree be descaled.

  • Page 22: Adjusting Grinder

    2 Preparing and using your IMPRESSA for the first time k T Press the Rotary Switch to confirm the setting. appears briefly on the display. CONFIRMED w HARDNESS 25°dH g T Turn the Rotary Switch until is displayed. EXIT k T Press the Rotary Switch to exit programming mode. is shown on the display.

  • Page 23: Switching On

    Precondition: Your IMPRESSA is switched on at the power switch and the on/off button Q is illuminated (standby). Q T Press the on/off button to switch the IMPRESSA on. appears briefly on the display. WELCOME TO JURA HEATING UP , the maintenance button c lights up. PRESS RINSE T Place a receptacle under the coffee spout.

  • Page 24: Switching Off (Standby)

    2 Preparing and using your IMPRESSA for the first time Switching off (Standby) When you switch your IMPRESSA off, the spouts with which a coffee speciality or milk have been prepared are rinsed. T Place a receptacle under the coffee spout and the frother. Q T Press the on/off button.

  • Page 25: Familiarising Yourself With The Control Options

    To do this, press any button. @ If you prefer to familiarise yourself with your IMPRESSA in a fun way on the computer, the interactive Knowledge Builder tutorial programme can be found on the Internet at www.jura.com.

  • Page 26: Preparation At The Touch Of A Button

    3 Familiarising yourself with the control options Preparation at the Prepare your favourite coffee speciality at the touch of a button. touch of a button All coffee specialities are prepared following this model. Example: This is how to prepare one coffee. Precondition: is displayed.

  • Page 27: Entering A Permanent Setting For The Amount Of Water For A Cup Size

    3 Familiarising yourself with the control options k T Turn the Rotary Switch while A LA CARTE öööö displayed. , the pre-set amount of water flows A LA CARTE öööö into the cup. Preparation stops automatically. ENJOY appears on the display. is then dis- COFFEE READY played.

  • Page 28: Permanent Settings In Programming Mode

    3 Familiarising yourself with the control options Example: To make permanent settings for the amount of water for an espresso, proceed as follows: Precondition: is displayed. COFFEE READY T Place an espresso cup under the coffee spout. i T Press and hold the 1 Espresso button. and the coffee strength is displayed.
  • Page 29 3 Familiarising yourself with the control options Programme item Subitem Explanation T Select your settings for the coffee and PRODUCTS milk specialities and hot water. T Indicate whether you operate your FILTER FILTER YES IMPRESSA with or without a CLARIS FILTER NO filter cartridge.
  • Page 30 3 Familiarising yourself with the control options Settings in programming mode always follow the same model. Example: To change the strength of one espresso from (normal) to (strong). ööö öööö Precondition: is displayed. COFFEE READY T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until MAINTENANCE appears.

  • Page 31: Viewing Information And Maintenance Status

    3 Familiarising yourself with the control options Viewing information Under the programme item you can query the INFORMATION and maintenance following information: status Number of the prepared coffee and milk specialities and hot water Maintenance status and number of maintenance programmes performed (cleaning, descaling, filter change) Number of performed cappuccino cleaning operations Precondition:...

  • Page 32: Preparation At The Touch Of A Button

    E During preparation, you can change the pre-set amount of water by turning the Rotary Switch. @ You can also try out the preparation of coffee specialities on- line. Visit the Knowledge Builder at www.jura.com. Espresso The classic coffee drink from Italy. There is a definite crema on the surface of the espresso.

  • Page 33: Coffee

    4 Preparation at the touch of a button Coffee Example: This is how to prepare one coffee. Precondition: is displayed. COFFEE READY T Place a coffee cup under the coffee spout. o T Press the 1 Coffee button. and the pre-set coffee strength are displayed. 1 COFFEE The pre-set amount of water flows into the cup.

  • Page 34: Cappuccino

    4 Preparation at the touch of a button Cappuccino Your IMPRESSA prepares a cappuccino at the touch of a button. It is not necessary to move the cup. Cappuccino with the Precondition: is displayed. COFFEE READY Professional Cappuccino Frother T Take the protective cover off the Professional Cappuccino Frother.

  • Page 35: Latte Macchiato

    4 Preparation at the touch of a button T Place a cup under the frother. p T Press the Cappuccino button. and the coffee strength are displayed. CAPPUCCINO The milk foam is then prepared. The operation stops auto- matically when the pre-set amount of milk is reached. Coffee preparation then begins.
  • Page 36 4 Preparation at the touch of a button E A brief pause follows during which the hot milk separates from the milk foam. This enables the formation of the typical layers of a latte macchiato. The duration of this pause can be defined in programming mode.

  • Page 37: Pre-Ground Coffee

    4 Preparation at the touch of a button To ensure that the frother works perfectly, you should rinse and clean it regularly. The description for this can be found in Chapter 6 ‘Maintenance – Cappuccino frother’. Pre-ground coffee You can choose a second coffee blend, for example decaffeinated coffee, with the filler funnel for pre-ground coffee.
  • Page 38 4 Preparation at the touch of a button Milk n Milk is prepared until preparation is interrupted by pressing any button. Foaming and heating milk Precondition: is displayed. COFFEE READY with the Professional Cappuccino Frother T Take the protective cover off the frother. T Attach the milk pipe to the frother.

  • Page 39: Hot Water

    4 Preparation at the touch of a button Foaming milk with the Precondition: is displayed. COFFEE READY Easy Cappuccino Frother T Take the protective cover off the frother. T Attach the milk pipe to the frother. For a milk carton/bottle use the long pipe, for a milk container the short pipe.
  • Page 40 4 Preparation at the touch of a button Example: This is how to prepare a portion of hot water. Precondition: is displayed. COFFEE READY T Place a cup under the hot water spout. ö T Use the selector switch to select the hot water portion symbol a.

  • Page 41: Permanent Settings In Programming Mode

    5 Permanent settings in programming mode 5 Permanent settings in programming mode Products With the programme item you can enter individual PRODUCTS settings for all coffee and milk specialities as well as hot water. The following permanent settings can be made: Product Amount Coffee strength...
  • Page 42 5 Permanent settings in programming mode Product Amount Coffee strength Temp. Milk – – – Hot water – – 25 ML 450 ML portion NORMAL X HIGH Hot water – – NORMAL X HIGH E The products which are selected with the selector switch can be individually set to inactive.
  • Page 43 5 Permanent settings in programming mode appears briefly on the display. CONFIRMED w COFFEE 40 ML g T Turn the Rotary Switch until is displayed. MILK 16 SEC k T Press the Rotary Switch to enter the programme item. MILK 16 SEC g T Turn the Rotary Switch until is displayed.

  • Page 44: Energy-Saving Mode (Energy Save Mode, E.s.m. © )

    5 Permanent settings in programming mode The values of 1 Espresso are then reset to the works setting. The IMPRESSA is switched off (standby). Energy-saving mode You can also set various energy-saving modes on your IMPRESSA: (Energy Save Mode, SAVE NO E.S.M.

  • Page 45: Time And Weekday

    5 Permanent settings in programming mode Time and weekday You already set the time and weekday when you used the machine for the first time. Example: To change the time from , proceed 08:45 09:50 as follows. Precondition: is displayed. COFFEE READY T Open the cover of the Rotary Switch.
  • Page 46 5 Permanent settings in programming mode E The programmable switch-on only works when the machine is switched on at the power switch (standby). Example: Proceed as follows to set the programmable switch-on time to and stipulate that your IMPRESSA does not switch 07:30 on automatically on Sundays.

  • Page 47: Automatic Switch-Off

    5 Permanent settings in programming mode k T Press the Rotary Switch to exit the programme item. ON/OFF MON YES g T Turn the Rotary Switch until is displayed. EXIT k T Press the Rotary Switch to exit the programme item. UNIT ON/OFF g T Turn the Rotary Switch until is displayed.

  • Page 48: Rinses

    5 Permanent settings in programming mode Rinses You can set whether the switch-on rinse should be started manu- ally or automatically. You can set whether cappuccino rinsing should be prompted imme- diately or 10 minutes after a milk product has been prepared. Example: Proceed as follows to programme that Cappuccino rinsing should be prompted immediately after a milk product has been prepared.

  • Page 49: Language

    5 Permanent settings in programming mode T Open the cover of the Rotary Switch. k T Keep the Rotary Switch pressed until MAINTENANCE appears. g T Turn the Rotary Switch until SETTINGS 24HRS / ML is displayed. k T Press the Rotary Switch to enter the programme item. SETTINGS 24HRS g T Turn the Rotary Switch until is displayed.
  • Page 50 5 Permanent settings in programming mode k T Press the Rotary Switch to confirm the setting. (example) appears briefly on the dis- GESPEICHERT w play. (example) SPRACHE DEUTSCH g T Turn the Rotary Switch until is displayed. EXIT k T Press the Rotary Switch to exit programming mode. (example) BITTE WÄHLEN...

  • Page 51: Maintenance

    6 Maintenance 6 Maintenance Your IMPRESSA has the following integrated maintenance pro- grammes: Rinse machine Change filter Clean machine Decalcify machine Rinse cappuccino frother Clean cappuccino frother E Clean or descale the machine or change the filter whenever the appropriate prompt is displayed. Maintenance tips To ensure that you get many years of reliable service out of your IMPRESSA and to guarantee the optimum coffee quality, the...

  • Page 52: Change Following A Prompt

    E If the CLARIS filter cartridge is not activated, you will not be prompted to change the filter. @ You can also try out ‘Changing the filter’ online. Visit the Knowledge Builder at www.jura.com. Change following a prompt To change the CLARIS filter cartridge when prompted to do so by...

  • Page 53: Manual Filter Change

    6 Maintenance c T Press the maintenance button. CHANGE FILTER PRESS RINSE T Remove the water tank and empty it. T Lift the cartridge holder. T Take out the old CLARIS filter cartridge and the extension. T Fit the extension on top of a new filter cartridge. T Insert the filter cartridge into the water tank, exerting slight pressure.

  • Page 54: Cleaning The Machine

    E Do not interrupt the cleaning programme. The quality of cleaning will be impaired if you do so. E JURA cleaning tablets are available from stockists. @ You can also try out the ‘Cleaning the machine’ operation online. Visit the Knowledge Builder at www.jura.com.
  • Page 55 , the maintenance button c lights up. RINSE T Open the cover of the filler funnel for pre-ground coffee. T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. c T Press the maintenance button.

  • Page 56: Descaling The Machine

    Clean up any splashes immediately. E The descaling programme lasts approx. 45 minutes. E JURA descaling tablets are available from stockists. E If you use a CLARIS filter cartridge and this is activated, you will not be prompted to change the filter.
  • Page 57 SOLVENT IN TANK T Remove the water tank and empty it. T Completely dissolve the contents of one blister (3 JURA des- caling tablets) in a container that holds 600 ml of water. This may take several minutes.

  • Page 58: Rinsing The Cappuccino Frother

    6 Maintenance T Refit the frother. T Place a receptacle under the coffee and hot water spout and another under the frother. c T Press the maintenance button. , water flows out of the frother and the hot water DECALCS spout.
  • Page 59 6 Maintenance It can be set in programming mode whether the rinsing prompt is displayed immediately or 10 minutes after preparation (refer to Chapter 5 ‘Permanent settings in programming mode – Rinses’). Rinsing following a prompt Precondition: COFFEE READY RINSE CAPPUCCINO displayed and the maintenance button c lights up.

  • Page 60: Cleaning The Cappuccino Frother

    Use only original JURA care products. E The IMPRESSA will not prompt you to clean the frother. E The JURA Cappuccino Cleaner is available from stockists. @ You can also try out the ‘Cleaning the cappuccino frother’ operation online. Visit the Knowledge Builder at www.jura.com.

  • Page 61: Disassembling And Rinsing The Professional Cappuccino Frother

    6 Maintenance T Place another receptacle under the frother. c T Press the maintenance button. , the frother and pipe are CAPPUCCINO CLEANS cleaned. , the maintenance button c WATER FOR CAPPUCCINO lights up. T Rinse the receptacle thoroughly, fill it with approx. 250 ml of fresh water and immerse the milk pipe in the water.

  • Page 62: Disassembling And Rinsing The Easy Cappuccino Frother

    6 Maintenance E Ensure that the individual parts are correctly and firmly attached to one another to ensure optimum function of the frother. T Firmly attach the frother to the Connector System © Disassembling and rinsing the Easy T Carefully remove the frother from the Connector System ©...

  • Page 63: Descaling The Water Tank

    6 Maintenance T Loosen the screw in the bean container and lift up the finger protection. T Remove the remaining beans with a vacuum cleaner. T Clean the bean container with a soft, dry cloth. T Put the finger protection down again and screw it back tightly in place.

  • Page 64: Display Messages

    7 Display messages 7 Display messages Message Cause/Result Action The water tank is empty. T Fill the water tank (see FILL WATER TANK You cannot prepare any coffee Chapter 2, ‘Preparing and using products, hot water or milk for the first time – Filling the products.

  • Page 65: Change Filter

    7 Display messages Message Cause/Result Action After 250 preparations the T Clean the machine (see COFFEE READY IMPRESSA will prompt you Chapter 6, ‘Maintenance – CLEAN NOW to clean it. Cleaning the machine’). The IMPRESSA is prompting T Descale the machine (see COFFEE READY you to descale it.

  • Page 66: Troubleshooting

    Grinder is making a very There are foreign objects T Contact Customer Support in your loud noise. in the grinder. country (see ‘JURA contact details / Legal information’). The frother does not The cappuccino frother T Rinse and clean the cappuccino...
  • Page 67 Contact Customer Support in your country (see ‘JURA contact details / Legal information’). E If you have not been able to solve the problem, contact Customer Support in your country (see ‘JURA contact details / Legal information’ ).

  • Page 68: Transport And Environmentally Neutral Disposal

    9 Transport and environmentally neutral disposal 9 Transport and environmentally neutral disposal Transport/Emptying Keep the packaging for your IMPRESSA. It should be used to protect the system the machine during transportation. In order to protect the IMPRESSA from frost during transportation, the system must be emptied.

  • Page 69: Technical Data

    10 Technical data 10 Technical data Voltage 230 V AC, 50 Hz 120 V AC, 60 Hz 220 –240 V AC, 50 Hz 220 V AC, 50 Hz Power 1450 W F 1250 W S D F G Safety test Energy 23 Wh SAVE NO...

  • Page 70: Index

    Hot water spout 8 Contact details 72 Control options 25 Internet 16 Cover Bean container 8 Filler funnel for pre-ground coffee 8 JURA contact details 72 Customer support 72 Knowledge Builder 16 Default settings in programming mode 41 Descaling Language 49 Machine 56...
  • Page 71 Index Legal information 72 Language 49 Products 41 Rinses 48 Machine Switch-on and switch-off time 45 Cleaning 54 Time and weekday 45 Descaling 56 Unit amount of water/Time format 48 Rinsing 51 Setting up 17 Rinses 48 Switching off (stand-by) 24 Rinsing Switching on 23 Maintenance 51...

  • Page 72: Jura Contact Details / Legal Information

    2006/95/EC – Low Voltage Directive 2004/108/EC – Electromagnetic Compatibility Technical changes We reserve the right to make technical changes. The illustrations used in the IMPRESSA S9 One Touch Manual show the IMPRESSA S9 Platinum model. Your IMPRESSA could incorpo- rate minor changes. Feedback Your opinion is important to us! Use the contact link at www.jura.com.

Table of Contents