Adjusting Grinder - Jura IMPRESSA S9 One Touch Manual

2 Preparing and using your IMPRESSA for the first time

Adjusting grinder

CAUTION
22
k T Press the Rotary Switch to confirm the setting.
CONFIRMED w
HARDNESS 25°dH
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
You can adjust the grinder continuously to suit the roast of your
coffee.
If you adjust the fineness of grind when the grinder is not operating,
the grinding wheel could be damaged.
Only adjust the fineness of grind when the grinder is run-
T
ning.
The fineness of grind setting is correct if the coffee flows regularly
from the coffee spout. A fine, thick crema is also formed.
Our recommendations:
Select a fine setting for a light roast.
Z
If the fineness of grind setting is too fine, the coffee only
U
drips from the coffee spout.
Select a coarse setting for a darker roast.
Z
If the fineness of grind is too coarse the coffee flows too
U
quickly from the coffee spout.
Example: To change the fineness of grind during coffee preparation,
proceed as follows:
T Open the cover of the bean container.
T Place a cup under the coffee spout.
o T Press the 1 Coffee button.
The grinder starts and
appears briefly on the display.
is displayed.
EXIT
is shown on the display.
is displayed.
1 COFFEE