Change Following A Prompt; Changing The Filter - Jura IMPRESSA S9 One Touch Manual

6 Maintenance

Changing the filter

Change following a prompt

52
Precondition:
COFFEE READY
T Place a receptacle under the coffee spout.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
appears.
k T Press the Rotary Switch to enter the programme item.
CLEAN CAPPUCCINO
f T Turn the Rotary Switch until
played.
k T Press the Rotary Switch to initiate the rinse operation.
MACHINE RINSING
Rinsing stops automatically and your IMPRESSA is then once
more ready for use.
E After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to replace the filter.
E After two months, the filter will cease to work. Monitor the
elapsed time by adjusting the date plate on the cartridge
holder.
E If the CLARIS filter cartridge is not activated, you will not be
prompted to change the filter.
@ You can also try out 'Changing the filter' online. Visit the
Knowledge Builder at www.jura.com.
To change the CLARIS filter cartridge when prompted to do so by
your IMPRESSA, proceed as follows:
Precondition:
COFFEE READY
played, and the maintenance button c lights up.
c T Press the maintenance button.
DURATION 2 MIN.
E If you want to change the filter at a later point in time, turn the
Rotary Switch until
nance programme by pressing the Rotary Switch. The prompt
'Change filter' remains on the display.
is displayed.
RINSE MACHINE
/
CHANGE FILTER
/
START YES
is displayed. Exit the mainte-
START NO
MAINTENANCE
is dis-
is dis-