Rinsing The Cappuccino Frother - Jura IMPRESSA S9 One Touch Manual

6 Maintenance
Manual descaling
Rinsing the
cappuccino frother
58
T Refit the frother.
T Place a receptacle under the coffee and hot water spout and
another under the frother.
c T Press the maintenance button.
DECALCS
spout.
The process is interrupted,
MACHINE RINSING
spout. The operation stops automatically,
T Empty the drip tray and coffee grounds container and put
them back into the machine.
The descaling operation is now complete. Your IMPRESSA
heats up and is once again ready to use.
E If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
You can initiate the 'Descaling the machine' operation manually.
Precondition:
COFFEE READY
filter is not activated.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
appears.
k T Press the Rotary Switch to enter the programme item.
CLEAN CAPPUCCINO
g T Turn the Rotary Switch until
is displayed.
k T Press the Rotary Switch.
DURATION 45 MIN.
T Continue with the second prompt to take action (indicated
by a T), as is described under 'Descaling following a prompt'.
E This chapter applies to the Professional and Easy Cappuccino
Frothers.
Each time milk has been prepared the IMPRESSA displays a prompt
for Cappuccino rinsing.
, water flows out of the frother and the hot water
HEATING UP
, water flows out of the coffee
is shown on the display and the
DECALCIFY MACHINE
/
START YES
.
.
EMPTY TRAY
MAINTENANCE