Manual Filter Change - Jura IMPRESSA S9 One Touch Manual

Manual filter change

c T Press the maintenance button.
CHANGE FILTER
T Remove the water tank and empty it.
T Lift the cartridge holder.
T Take out the old CLARIS filter cartridge and the extension.
T Fit the extension on top of a new filter cartridge.
T Insert the filter cartridge into the water tank, exerting slight
pressure.
T Close the cartridge holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert.
T Place a receptacle (at least 500 ml) under the frother.
E If you are using the Professional Cappuccino Frother, set the
selection lever of the frother to the steam position n.
c T Press the maintenance button.
FILTER RINSING
E You can interrupt filter rinsing at any time. To do this, press
any button.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Filter rinsing stops automatically after approx. 500 ml. The
IMPRESSA heats up and is once again ready to use.
You can initiate the 'Changing the filter' operation manually.
Precondition: The filter is activated and
shown on the display.
T Open the cover of the Rotary Switch.
k T Keep the Rotary Switch pressed until
appears.
k T Press the Rotary Switch to enter the programme item.
CLEAN CAPPUCCINO
/
PRESS RINSE
, water flows out of the frother.
COFFEE READY
MAINTENANCE
6 Maintenance
is
53