Jura IMPRESSA S9 One Touch Manual page 36

4 Preparation at the touch of a button
Latte macchiato with the
Easy Cappuccino Frother
36
E A brief pause follows during which the hot milk separates from
the milk foam. This enables the formation of the typical layers
of a latte macchiato. The duration of this pause can be defined
in programming mode.
Coffee preparation then begins. The pre-set amount of
water flows into the glass. Preparation stops automatically.
appears on the display.
ENJOY
displayed.
To ensure that the frother works perfectly, you should rinse and
clean it regularly. The description for this can be found in Chapter 6
'Maintenance – Cappuccino frother'.
Precondition:
COFFEE READY
T Take the protective cover off the Easy Cappuccino Frother.
T Attach the milk pipe to the frother. For a milk carton/bottle
use the long pipe, for a milk container the short pipe.
T Insert the other end into a milk carton/bottle or connect it to
the milk container.
T Place a glass under the frother.
q T Press the Latte Macchiato button.
LATTE MAC.
The milk foam is then prepared. The operation stops auto-
matically when pre-set amount of milk is reached.
E A brief interval follows during which the hot milk separates
from the milk foam. This enables the formation of the typical
layers of a latte macchiato. The duration of this interval can be
defined in programming mode.
Coffee preparation then begins. The pre-set amount of
water flows into the glass. Preparation stops automatically.
appears on the display.
ENJOY
displayed.
COFFEE READY
is displayed.
and the coffee strength are displayed.
COFFEE READY
is then
is then