Table off contents Jura Impressa S50/4000/401 10. Drawing off steam..........page 12 1. Description ...........page 7 The symbol displays mean .......page 7 10.1 Return to readiness for coffee ....page 12 2. Safety instructions .........page 7 11. Drawing off hot water ........page 12 Warnings ..........page 7...
Jura coffee machine is not suitable for coffee beans The machine is connected to the mains power socket via an which were treated, during or after roasting, with additives electric cable.
To adjust the grinding, turn the selector key (Fig. 1) to the de- Setting 3 German water hardness 16 – 23° sired position. French water hardness 28.64 – 41.14° You have the following options: he smaller the dots, the finer the grinding the larger the dots, the coarser the grinding Setting 4 German water hardness 24 –...
3.7 Adjustable automatic switch-off 4. First use of the machine You can alter the automatic switch-off of 3 hours set by Jura. The Switch your machine on with the ON/OFF switch. The sym- machine offers you 4 settings for this: flashes and the symbol lights up.
Switch the machine on with the ON/OFF switch. 8. Setting the powder quantity Place a vessel large enough (about 1 litre) under the pivoting The aroma of the coffee also depends upon the powder quantity, nozzle for hot water/steam (17) and turn the selector key for cof- which can be set infinitely with the rotary key (C) behind the fee or hot water/steam (17) to the symbol .
Never use water-soluble instant coffee or express coffee. We When steam is drawn off, there can be spattering at the recommend that you only use powder from freshly ground beginning. The pivoting nozzle for hot water/steam (18) coffee beans or pre-ground, vacuum-packed coffee. Never becomes hot.
13. Care and maintenance 13.4 Removing foreign objects The machine has automatic controls. The display gives indications Switch your machine off with the ON/OFF key. of due cleaning and care work. Remove the plug from the power socket. Open the bean container (13) and remove the beans. The remain- 13.1 Fill water ing beans can be removed with a vacuum cleaner.
(14). Place a sufficiently sized container under the pivoting nozzle for Now put a Jura cleaning tablet into the pre-ground coffee pow- hot water/steam (18). der filling funnel (13) (Fig 8). Turn the selector key for coffee or hot water/steam (17) to Press the key .
Turn the selector key for coffee and hot water/steam (17) back to gramme at a later stage. the symbol Only use Jura descaling tablets, which you can obtain from The descaling process is continued and the descaling solution is your dealer.
16. Disposal For correct disposal, you should return your coffee machine to your dealer, Jura service centre or the firm of Jura. 17. Tips for perfect coffee Height-adjustable coffee spout You can adjust the height of the coffee-spout to the size of your cups (Fig.
18. Messages Display Cause Action 220 draw-offs or 180 rinses have been Clean as described in donepoint 14 The display does not go off even though Run cleaning programme again; the machine has been cleaned this time, do not add a cleaning tablet The machine must be de-scaled De-scale as described in point 15 The display does not go off even though...
Page 18
Display Cause Action Pre-selection of powder coffee without Draw coffee off as described fin point 9.1 drawing of The tank is empty Top up with water The water level indicator in the tank is jammed Empty the tank, rinse it out and put it back in is jammed again full The tank is scaled, the water level...
– Clean frothing nozzle frothing milk – Frothing nozzle in wrong – Draw off steam position(see point 10) If these messages or problems still persist, please get in touch with your dealer or directly with the firm of Jura Elektroapparate AG.
All obligations on the part of Jura Elektroapparate AG result from the sales agree- The machine complies with the following EU directives: ment in question, which also contains the complete details of the 73/23/EWG dated 19/02/1973 “Low Voltage Directive”...