Table of Contents
Advertisement
E If milk has been prepared, you will be
prompted to clean the milk system
want to clean the milk system
10 seconds the switch-off process continues
automatically.
'Machine is
rinsing', the system rinses itself.
The operation stops automatically. Your ENA
is switched off.
4 Permanent settings in pro-
gramming mode
Press the
' P '
button for approximately 2 seconds
to enter programming mode. You can easily
navigate through the programme items and
permanently save the required settings using the
multi-function buttons. The following settings can
be made:
Programme
Sub-item
item
'Maintenance
'Clean',
status'
'Clean the milk
'Descale',
'Filter'
'Rinse',
'Maintenance information'
'Product
settings'
'Machine
'Switch off after'
settings'
'Save energy'
'Factory setting'
'Units'
'Water hardness'
'Choose language'
'Connect
'Disconnect accessories'
(Only displayed if the JURA
Smart Connect is being used.)
'Version'
('Do you
now?'). After
system',
(only if filter is fitted),
accessory',
4 Permanent settings in programming mode
Explanation
T Here you can start the required maintenance
programme or find out what maintenance actions are
required.
T Select your settings for speciality coffees and hot
water.
T Set the time after which the ENA should switch off
automatically.
T Activate energy-saving mode.
T Reset the machine to its factory setting.
T Select the unit for the amount of water.
T You can set the water hardness of the water used.
T Select your language.
T Connect the ENA wirelessly to a JURA accessory or
disconnect the connection again.
Software version
de
en
fr
it
nl
es
pt
ru
47
Advertisement
Table of Contents
