Permanent Settings In Programming Mode - Jura 729 Instructions For Use Manual

4 Permanent settings in programming mode

Programme item
'Machine settings'
'Maintenance
status'
'Product settings'
Touch ' P ' to enter programming mode. Move your finger across the
display to navigate through the programme items and permanently
save the desired settings. The following settings can be made:
Sub-item
'Switch off after'
'Save energy'
'Factory setting'
'Units'
'Display'
'Water hardness'
'Choose language'
'Water tank illumination'
'Product counter',
'Maintenance counter'
'Connect accessory',
'Disconnect accessories'
'Empty system'
'Version'
'Clean the milk system',
'Clean',
'Change the filter' (only if
filter is fitted),
'Descale',
'Rinse',
'Maintenance information',
'Lock display'
4 Permanent settings in programming mode
Explanation
T Set the time after which the Z8 should switch
off automatically.
T Activate energy-saving mode.
T Reset the machine to its factory setting.
T Select the unit for the amount of water.
T Change the display settings.
T Adjust the water hardness.
T Select your language.
T Change the setting for water tank illumina-
tion.
T Keep track of all products prepared and view
the number of maintenance programmes
performed.
T Connect the Z8 wirelessly to a JURA accessory
or disconnect the connection again.
T Empty the system to protect it from frost
during transport.
Software version
T Start the required maintenance programme
here.
T Select your settings for speciality coffees and
hot water.
25