Hot Water; Adjusting The Grinder; Adjusting The Product Settings - Jura J8 twin Instructions For Use Manual

Remove the filler funnel.
T
Close the cover.
T
Touch 'Next'.
T
The preset amount of water for espresso flows into the cup.
E The powder chute and cover can be removed and also cleaned, if necessary.

Hot water

The J8 twin allows you to prepare different variants of hot water:
U
'Hot water'
U
'Hot water for green tea'
'Replace product' function to select hot water for green tea.)
J CAUTION
There is a danger of scalding from hot water splashes.
Avoid direct contact with the skin.
T
Example: Hot water
Place a cup under the hot-water spout.
T
Tap 'Hot water'.
T
The preset amount of water flows into the cup.

Adjusting the grinder

The grinder adjustment switches are used to adjust both grinders according to your preference for a mild or intense aroma.

Adjusting the product settings

Touch a product for approximately 2 seconds to access the settings:
U
Save permanent settings for preferred coffee strength and quantity, change the product name or preselect options such as 'Sweet
milk foam', 'Extra Shot' or 'Ground coffee'.
U
The 'Replace' symbol allows you to choose between
E Depending on the selected product, there will be different settings available which are represented by symbols on your display.
The settings always follow the same model.
(Product must be added to the start screen. To do this, tap and hold any product for 2 seconds, then use the
Tap, click or scan to watch
the video tutorial on YouTube
'Replace product' and 'Reposition the product'.
4 Preparation
13