Edit/Delete A Port-Based Vlan - Intel Express 530T User Manual

C H A P T E R
NOTE
Ports from any switch in the
stack can be members of the
VLAN; follow this procedure to
add ports from each switch, on
switch at a time.
LOCATION
Main Menu
Configure VLAN
Edit/Delete a Port-based..
Edit VLAN
5 Using Local Management
To create a port-based VLAN
1 Select Configure VLAN from the Main Menu.
Note: Make sure the switch's current VLAN operation mode is set
to port-based VLAN. If another type of VLAN is running, refer to
"Configure VLAN Operation Mode" in Chapter 5 to change the
VLAN operation mode.
2 Select Add a Port-based VLAN and press e.
3 Type a name for the new VLAN and press e.
4 Select the switch whose ports you want to be members of the
VLAN, using the z to toggle between switches.
5 Select ports to add to the VLAN by using the z to toggle the
Member field to Yes.
6 Select the APPLY button and press e.

Edit/Delete a Port-based VLAN

Description
Action: Delete a VLAN or change its port membership. Press the
z to toggle Edit or Delete and then use the T or S keys to
select a VLAN and press e. The DEFAULT_VLAN cannot be
deleted from the switch.
VLAN Name: The names of existing port-based VLANs.
Ports: Total number of member ports in the specified VLAN.
85